Do you have a question about the natus Olympic Warmette 48 and is the answer not in the manual?
Category | Laboratory Equipment |
---|---|
Model | Olympic Warmette 48 |
Type | Infant Warmer |
Manufacturer | Natus |
Features | radiant heat |
Provides necessary information for installation, maintenance, and service of the Olympic Warmette.
Explains symbols, notes, and formatting conventions used for clarity and safety.
Details the Olympic Warmette's features, capacity, two available sizes, and design.
Step-by-step instructions for initial setup, including leveling and cleaning.
Procedures for checking heater functionality and troubleshooting heating issues.
Outlines power needs, wiring, and initial operational tests for the Warmette.
Instructions for powering on, setting temperature, and placing items safely.
Explains the function of the power switch, temperature dial, and indicator lights.
Guide on how to remove and clean the unit's internal trays.
Instructions for cleaning external and internal surfaces of the Warmette.
Details quarterly and annual maintenance like lint filter cleaning and component checks.
A chart listing problems, possible causes, and solutions for Warmette operation.
Information on how to contact Natus Medical for technical assistance.
Guidelines for qualified technicians performing service and repair.
Procedure to verify the internal temperature accuracy of the Warmette.
Instructions for replacing common parts like fuses, switches, lamps, thermostat, blower, and heater.
Details on how to order replacement parts and accessories from the manufacturer.
Specifies the device's purpose and physical dimensions for different models.
Details power requirements, operating temperature, and humidity ranges.
Describes the mains power switch and SET TEMP dial.
Includes catalog numbers, regulatory status, warranty, and disposal information.
Illustrates the electrical connections and components of the Warmette.
Provides simplified diagrams of the Warmette's electrical system.