NavePoint 2U - Mounting the Enclosure to the Wall; Mount to Wall

www.NavePoint.com 5 customerservice@navepoint.com
-Mounting the Enclosure to the Wall
Remove Front Cover
Mount to Wall
1. Disassemble the Front Cover by removing 2 M4 Screws on each side of Front Cover.
2. Attach the Enclosure to a wall or other suitable mounting surface using 4 appropriate mounting screws/anchors
(not included).
Warning: The enclosure can hold up to 60 pounds evenly distributed. Make sure wall surface can hold weight
of the enclosure and equipment.