Connect to Lowrance Displays | 65
• Press Menu, highlight
Radar Setup
and press Ent. Press to select
Adjust Heading Line
and press Ent. That will place an arrow on each side of the green Heading Line.
• Use to adjust the position of the green heading line, so its line to the reference
point's radar image matches your bow's actual line to the reference point.
• Press Exit to remove the heading line arrows from the display.
Adjust Tune
Tuning should require no adjustment during the life of the unit. We strongly recommend you do
NOT adjust Tune settings yourself. This feature is intended for use only by trained technicians.
If for some reason you need to use this function, consult your dealer or customer service about
the software updates necessary for tuning.
To Next Page
Loading...
Need help?
General
