To Next PageTo Next PageWhy is my Navien NCB-28LDWE space heating not working?
If your Navien Boiler's space heating isn't working, first ensure the temperature setting isn't too low. Then, confirm the system has power and isn't in standby mode by checking the power connection and pressing the Power button. Note that the heating side won't function when the unit is heating domestic hot water (DHW). Finally, inspect and clean the filters on the heating side.
How to fix not hot enough water from Navien NCB-28LDWE Boiler?
If the water from your Navien Boiler's hot water tap is not hot enough, begin by checking the boiler’s temperature setting. Also, check for cross plumbing between the cold and hot water lines.
What to do if Navien Boiler hot water is too hot?
If the water from your Navien Boiler's hot water tap is too hot, check the boiler’s temperature setting.
How to fix no water coming out of Navien NCB-28LDWE Boiler?
If no water comes out when you open the hot water tap connected to your Navien Boiler, make sure that the shut–off valves on the hot and cold pipes are open.
Provides detailed specifications and performance data for the boiler models.
Explains the different operational modes of the boiler.
Provides a flow diagram of the recommended installation steps.
Guides on selecting a suitable location for boiler installation.
Instructions for securely mounting the boiler onto a wall.
Details on connecting the boiler to the space heating system.
Instructions for connecting the boiler for domestic hot water supply.
Steps for properly connecting the condensate drain line.
Procedure for measuring the inlet gas pressure.
Minimum distances for flue terminal placement relative to building elements.
Guidance on choosing between coaxial and dual duct flue systems.
Details on horizontal and vertical coaxial flue system installations.
Details on horizontal and vertical dual duct flue system installations.
Configuration of DIP switches on the main circuit board.
General