To Next PageTo Next Page
Need help?Do you have a question about the Navien NPN-160U and is the answer not in the manual?
General| Fuel Type | Natural Gas/Propane |
|---|---|
| Energy Factor | 0.96 |
| Warranty (Heat Exchanger) | 15 years |
| Warranty (Parts) | 5 years |
| Gas Connection | 3/4" NPT |
| Water Connection | 3/4" NPT |
| Electrical Requirements | 120V, 60Hz |
| Minimum BTU | 15, 000 BTU/H |
| Type | Tankless Water Heater |
| Heating Capacity | 160, 000 BTU/hr |
| Ignition Type | Electronic Ignition |
| Venting | 2 inch PVC/CPVC |
| Max. Output (BTU) | 160, 000 BTU/hr |
Lists items included in the water heater package.
Details optional accessories available for the water heater.
Provides detailed technical specifications for the water heater models.
Explains the controls and display functions of the water heater's front panel.
Shows diagrams and lists key internal components of the water heater.
Displays diagrams and lists the physical dimensions of the water heater.
Explains how to read and understand the water heater's rating plate information.
Guides on selecting an appropriate installation site, considering clearances and utilities.
Provides instructions and safety precautions for securely mounting the unit.
Details the procedures and safety warnings for connecting the gas supply.
Outlines the steps and guidelines for connecting the water inlet and outlet.
Covers essential safety and installation guidelines for proper venting of indoor models.
Explains safe and correct procedures for connecting the electrical power supply.
Describes how to configure the water heater's functionality using DIP switches.
Lists the components included with the remote controller system.
Details how to connect the extension cable between the water heater and remote controller.
Explains how to install the wall mounting bracket for the remote controller.
Describes the functions and display of the remote controller unit.
Guides on setting up and configuring multiple remote controllers.
Instructions for activating the controller's child lock mode.
Steps for setting the current time on the remote controller.
Instructions for programming the hot water recirculation timer settings.
How to manually start the hot water recirculation feature.
Procedure to clear all programmed timer settings on the controller.
Illustrates options for plumbing water supplies in a cascade system.
Details how to connect communication cables for cascade system setup.
Instructions for covering clamps with front cover caps after installation.
Contains technical data like pressure drop curves for various models.
Provides a detailed wiring diagram for the water heater components.
Presents a ladder diagram illustrating the electrical control logic.
Shows exploded views and part numbers for major assemblies.
A checklist to ensure all installation steps and requirements are met.
Information about an optional controller for space heating and DHW.
Details on an optional kit for efficient DHW recirculation.
Specific installation requirements for Massachusetts.
