Naviforce NF9097 User Manual

N/\/ RCE
NF9A97
Movement instruction
manual
tr
lFo
LIGHT
(Button
A)
-
MODEL
(Button
A)
-
(Button
D)
ST/STP
(Button
C)
REINICIAR
A. Introduction to the
function
i 5}ff#**$i*xt}x*:1,iTtu
: Ii, 5e minu,es
5e sec.nds,
B. Product function
mode
1;,3":',t-lT',
I
E
I
il,ffir;fl:tetneen
|ffi,::x
Ararm mode
Stopwatch
1. In any mode,
press
the
A bufton
to illuminate
for
3 seconds.
2. Synchronization
mode
to).
At
this time.
"Second"
t'lasires.
press
the D
"Second"
kel'
to
retum to
7,ero,
press
B to select the
following items in
order:
Second
*
Minute
-+Hour-+12124
Hours Svstem
-+
\4onth
-4
Day
-+ Year
al
I
b)
Press D to adjust
the selected item.
c)
Press
C
to confirm
and return
to the time display status.
d). When establishing
"second", if the second value
is between
30 and 59, the score
will
increase by
I
when the second
value
returns
to 00;
If the second
value is between
00
and 29.
the
score
value
remains unchanged.
3.
Alarm mode
Press
D to turn the
alarm on or off
(Htll
)
And the bell cvery
hour
(#).
to).
At this time,
"Time" flashes,
press
B
to
select
the setting
item, the sequence is as
follows:
Minute
------+
Hour
b)
Press D to sort
the
selected
item.
c) Press C to confirm
and retum
to the alarm display
mode.
When the alarm is activated,
when
the
alarm setting
time is reached,
(HllD
Will flash and
the alarm
rvill autornatically
stop after
20
seconds.
4. Stopwatch
mode
stop the seconds,
and
press
the C
button
when the seconds
in operation stop to return
to zero.
"SPL"
symbol)
start
measuring halfway.
Then
press
the
C
key to start
the
timing,
that
is, record the end
time of
the first
player, press
the D
key to measure the
half to half, record the end
time of
the second
player
and
finally
press
the
C
key to delete
the record.
5. Countdown
mode
key will automatically
return to the
initially set start
time.
approximately
10
seconds,
press any key
to
stop
the alarm.
to). At this
time,
"Time"
flashes.
press
B to select
the setting item,
the sequence is
as follows:
Minute
+ Hour
b) Press
D to adjust
the selected
item
c) Press C
to confirm
6.
Time mode
set
"minute",
press
B to
"flash",
press D to set
"hour".
Press the C button
again to return
to normal
time.
Countdown
mode

Naviforce NF9097 Specifications

General

Brand	Naviforce
Model	NF9097
Type	Wristwatch
Case Material	Alloy
Water Resistance	Yes
Case Diameter	45 mm
Case Thickness	12 mm
Band Width	22 mm
Movement	Quartz
Clasp Type	Buckle
Dial Window Material Type	Mineral Glass
Display	Analog
Clasp	Buckle
Features	Chronograph, Date Display
Style	Casual

Summary

Watch Functions Overview

Introduction to Watch Features

Lists key functions: 13-digit display, 12/24hr system, automatic calendar, stopwatch, countdown, dual time, and EL backlight.

Watch Function Modes

Illuminating the Display

Press button A in any mode to illuminate the display for 3 seconds.

Time Synchronization Mode

Enter time setting status by holding button C. Adjust seconds, minute, hour, 12/24hr, month, day, year.

Alarm Mode Operations

Toggle alarm on/off with D. Enter setting mode with C. Adjust minute and hour using B and D.

Stopwatch Mode Functions

Start/stop timing with D. Reset with C. Segmented timing (SPL) available with C key.

Countdown Mode Settings

Set countdown time (up to 23:59:59.99) via C and D buttons. Alarm sounds when zero is reached.

Setting Time in Time Mode

Enter two-beat mode. Use C to flash seconds, D to set. Use B to flash minutes, D to set.