Navman W100 User Manual

WIND
RESET
NAVMAN
NAVMAN

Navman W100 Specifications

General

Type	Fishfinder
Waterproof Rating	IPX7
GPS Receiver	Yes
Transducer Frequency	200 kHz
Display	Color TFT

Summary

Specification

Installation

Location

Details on selecting an optimal installation position for the instrument.

Mounting

Instructions for physically mounting the NAVMAN W100 unit.

Wiring Connection

Multiple Instruments

Describes connecting the NAVMAN W100 with other instruments.

Installation of the NAVMAN W100 Mast Head Transducer

Calibration Procedures

Linearisation of Wind Sensor and Instrument

Process to match wind sensor characteristics for accurate data.

Alignment of Wind Vane and Display

Adjusting displayed wind direction to match physical alignment.

Wind Speed Calibration

Adjusting the wind speed reading for accuracy.

Operation

Backlighting On / Off

How to control the display backlight for visibility.

Wind Speed Alarm On/Off

Enabling or disabling the wind speed alarm feature.

Set Wind Speed Alarm

Procedure to configure the wind speed alarm threshold.

True or Apparent Wind Display

Switching between true and apparent wind data display.

Select Speed Function

Select Speed Units

Changing the units for wind speed display (Knots/Metres/Sec).

Reset Maximum Wind Speed

Procedure to reset the recorded maximum wind speed.

Troubleshooting Chart