Need help?Do you have a question about the Naxa NPB-426 and is the answer not in the manual?
Power| power requirement | AC 110/220V ~ 60/50Hz |
|---|---|
| power consumption | 17 Watts |
| battery voltage | DC 12V UM-1 x 8 PCS |
Operating Environment| operation temperature | +5° C - +35 °C |
|---|
Receiver Specifications| receiving bands | AM / FM |
|---|---|
| tuning range AM | 530 - 1710 KHz |
| tuning range FM | 88 - 108 MHz |
Compact Disc Section| optical pickup | 3-Beam Laser |
|---|---|
| frequency response CD | 100Hz – 16 KHz |
Cassette Section| recording system | 2 Tracks 2 channel (Stereo) |
|---|---|
| biasing system | Magnet Erase |
| frequency response cassette | 125 – 6.3 KHz |
Audio Section| power output | Maximum 2.5 Watts x 2 |
|---|---|
| headphone impedance | 4 – 32 Ohms |
| wow and flutter | 0.35 % WRMS (JIS) |
Weight and Dimensions| weight | 4.0 kg |
|---|---|
| width | 455 mm |
| height | 220 mm |
| depth | 240 mm |
Load compact discs here. The label side should face up.
Position the speaker next to the main unit so that the top of the speaker rises one inch above the top of the main unit.
Make sure the AC voltage switch [32] is set to match the voltage supplied in your region.
Install 8 UM-1 “D” size batteries to enjoy music wherever you are.
Press the PLAY/PAUSE key [18] to start playback. Play will start from track 1.
As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the casing.
Do not block ventilation, place flames, discard batteries properly, and avoid rain or moisture.
To Next Page
