Never touch or handle the auger when the system is powered. There will be no
warning when the system starts.
The system is provided with an electric current of 230V / 50Hz. An incorrect
installation or improper repair can cause life-threatening electric shock. Electrical
connection must be performed by the person who has the right skills and
competences. Performing electrical installation must be performed in respect to the
current local rules. Always disconnect the system from the power supply before
starting maintenance work and servicing. The system must be connected to a
separate electrical circuit, which is equipped with the proper circuit breaker and
residual current device.
Never climb into a pellet silo without proper ventilation. Enough wood gas can be
toxic and even deadly.
Always read the manual prior to installing and repairing the system. If necessary,
seek out professional help.
The system may only be serviced by knowledgeable professionals. If you are in doubt
about the safe operations and use of this equipment, please contact your dealer.
!
!
!
To Next Page
Loading...
