NCE 20LSSB - Operation; Microwave Cooking

This microwave oven uses modern electronic controls to adjust cooking parameters
to meet your needs better for cooking.
OPERATION
1. Clock Setting
When the microwave oven is electried,the oven will display "0:00", The buzzer will
ring once.
1) Press "CLOCK/PRE-SET" , the hour gures will ash;
2) Press " " or " " to adjust the hour gures,the input time should be within 0--23.
3) Press "CLOCK/PRE-SET", the minute gures will ash.
4) Turn " " or " " to adjust the minute gures, the input time should be within 0--59.
5) Press "CLOCK/PRE-SET" to nish clock setting. ":" will
has been nished.
Note:
1) The clock will not work if it is not set when powered.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
5) ash, The clock setting has
1)
2. Microwave Cooking
1) Press the "Microwave" key once, and "P100" will display.
2) Press "Microwave" for times or press " "and " " to select the
microwave power from100% to 10%. "P100", "P80", "P50", "P30", "P10" will display
in order.
3) Press "START/+30SEC/CONFIRM" to conrm.
4) Press " " or " "to adjust the cooking time.
(The time setting should be 0:05-95:00)
5) Press " START/+30SEC./CONFIRM " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follows:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Microwave Power 80% 50% 30% 10%100%
Display
12