NCE 20LSSB - Pre-Set Function

7. Pre-set Function
1) Set the clock rst. (Consult the instructions of clock setting.)
2) Input the cooking program. Maximum two stages can be set. Defrosting should not be
set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press "Microwave" once;
b. Press " " or " " to choose 80% microwave power till "P80" display;
c. Press "START/+30SEC/CONFIRM" to conrm;
d. Press " " or " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press "START/+30SEC/CONFIRM". Then do as
following:
3) Press "CLOCK/PRE-SET". The hour gures will ash;
4) Press " " or " " to adjust the hour gures, the input time should be within 0--23.
5) Press "CLOCK/PRE-SET", the minute gures will ash.
6) Press " " or " " to adjust the minute gures, the input time should be within 0--59.
7) Press "START/+30SEC./CONFIRM" to nish setting. ":" will light up, buzzer will ring
twice when the time arrives, then cooking will start automatically.
Note: clock must be set rst. Otherwise the pre-set function will not work.
8. Auto Menu
1) In waiting state, press " " to choose the menu from "A-1" to "A-8".
2) Press "START/+30SEC/CONFIRM " to conrm the menu you choose.
3) Press " " or " " to choose the food weight.
4) Press "START/+30SEC./CONFIRM " to start cooking.
14