Need help?Do you have a question about the NCR 7360-K038 and is the answer not in the manual?
General| Category | Computer Hardware |
|---|---|
| Type | POS Terminal |
| Model | NCR 7360-K038 |
| Memory | 4GB DDR3 |
| Operating System | Windows 10 IoT Enterprise |
| Connectivity | Ethernet, USB, Serial |
| Power Supply | 90W |
Lists the components included in the processor upgrade kit for the NCR FastLane SelfServ Checkout 7360.
Step-by-step instructions for performing the processor upgrade on the NCR FastLane SelfServ Checkout 7360.
Unlock the tower, raise the terminal, and disconnect cables before disassembly.
Detach the terminal from the display bracket and remove the rear cover.
Loosen spring-loaded screws and remove the CPU cooler assembly from the motherboard.
Remove the old CPU and install the new CPU module using specialized tools.
Apply a precise amount of thermal grease evenly onto the new CPU's surface.
Remove old thermal grease from the CPU cooler surface using appropriate tools.
Position the CPU cooler over the installed CPU and tighten the spring-loaded screws.
Reinstall the rear cover and the terminal, then reconnect all cables to the motherboard.
Lower the terminal and lock the tower to complete the processor upgrade.
To Next Page