NCR SelfServ 90 R1.2 Kit Instructions

6 Datalogic 1500i Scanner (R1.2andR2.0)
b. Mount the Imaging Scanner assembly over the Imager Shield.
! Important: On the front side of the fascia, make sure that all sides of the Imager
Scan Window is flush against the sides of the Imager Shield. Adjust the alignment of
the Imager accordingly.
c. Secure the Imaging Scanner assembly to the kiosk using three nuts.

NCR SelfServ 90 R1.2 Specifications

General

Brand	NCR
Model	SelfServ 90 R1.2
Category	Racks & Stands
Language	English