Chapter 2: Hardware Installation
Installation Restrictions
• The NCR RealPOS XR3 conforms to all applicable legal requirements. To view the
compliance statements see the NCR RealPOS Terminals Safety and Regulatory
Statements (B005-0000-1589).
• Install the NCR RealPOS XR3 near an electrical outlet that is easily accessible. Use
the power cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the
NCRRealPOSXR3 where the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the NCR RealPOS XR3.
Warning: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution: Do not connect or disconnect the transaction printer while the terminal is on.
This can result in system or printer damage.
To Next Page
Loading...