Need help?Do you have a question about the NDS SC350M and is the answer not in the manual?
General| Model | SC350M |
|---|---|
| Type | Solar Charge Controller |
| Connectivity | Wired |
| Number of Outputs | 1 |
| Protection | Overcharge, Over-discharge, Overload, Short Circuit |
| Compatibility | 12V/24V Battery Systems |
| Input Voltage | ≤50V |
Covers important safety guidelines for installation and usage of the device to prevent hazards.
Explains the efficiency gains from MPPT technology for optimal photovoltaic module performance.
Details the SCE 320/360 models, input power, charge current, and OPTICHARGE firmware.
Summarizes key features like MPPT, OPTICHARGE, charging phases, and connectivity options.
Details how the SUNCONTROL2 charges service and starter batteries and the conditions for charging.
Identifies front panel connection ports and their corresponding functions for the device.
Provides instructions on how to mount the device and where connections are located.
Explains the importance of the Dip Switch for selecting the correct battery charging curve.
Advises on using appropriate cable cross-sections and disconnecting the negative cable for long stays.
Details how to set charging curves for the leisure battery (B1) using Dip Switches.
Explains the different phases (Pulse, Reconditioning, Bulk Charge) for the B1 battery.
To Next Page
