TG110DL User’s Manual
3 | P a g e NDT Systems, Inc. 5542 Buckingham Drive, Huntington Beach, CA 92649, PH: 714-893-2438
2. AREAS OF APPLICATION
The TG110DL gauges a wide range of thicknesses on metals, plastics, ceramics, glass or virtually any other material
which conducts ultrasound. The actual range is material and application dependent, and requires fairly parallel (or
concentric) measurement surfaces.
The durable custom extruded, “Easy Grip” design allows the unit to withstand the rigors of heavier industrial
environments, while its accuracy makes it suitable for use in less rugged conditions.
A major application for the TG110DL is assessing wall thinning due to corrosion and erosion, including many types
of pitting action, at normal and elevated material temperatures.
Example subjects of evaluation:
Airframes/Aircraft windows Bulkheads
Axles, Wheels, Rails/Casings
Beams/Struts/Castings Billets/Bars/Containers
Boilers/Extrusions Bridges/Flanges
Forgings/Plates/Slabs/Blooms Glass Plate
Pressure Vessels Heat Exchanger
Tubing/Rolls Machined Parts
Ship Hulls/Decking Pipe/Tubing
Steam Lines Plastic Shapes
Pipe/Storage Tanks
To Next Page