27
Troubleshooting
①
Fails to Power On
• The projector may be out of power. Charge the projector for 15-30
minutes and see if the power button light turns on.
②
Cannot Charge
• Use the included adapter and charging cable to charge the
projector.
• Try a different adapter (at least 45W) and USB-C charging cable.
③
Cannot Connect to a Wi-Fi Network
• Place your projector within 16 ft / 5 m of the router and reconnect.
• Set your router to 2.4 GHz or 5 GHz and retry.
• Restart your projector and router and retry.
• Try a different Wi-Fi network or your phone's hotspot.
④
Blurry Image
• Slightly move the projector or press on the remote to start
autofocus.
• To manually adjust the focus, go to [Settings] > [Projector] > [Focus
Settings] > [Manual Focus Correction], and use and on the
remote.
• Adjust the projection angle and direction as well as the height of
the projector if necessary.
⑤
Distorted Image
• Update the firmware to the latest version via [Settings] > [System]
> [About] > [System update].
• Go to [Settings] > [Projector] > [Image Correction] > [Perform
Manual Keystone Correction].
• Move the projector left or right, or alter the tilt if necessary.
⑥
No HDMI Signal
• Use a different HDMI cable.
• Connect your projector with another HDMI playback device.
To Next Page
Loading...
