English
22
Troubleshooting
①
Capsule II fails to power on using the remote control.
•
Press and hold
for 2 seconds on the projector to
turn it on.
•
When powered off, you cannot use the remote control
to turn it on.
②
The remote control doesn't work.
•
Make sure the battery is already installed in the remote
control.
•
Replace the batteries.
③
Images become blurred.
•
Slightly move the projector to engage autofocus.
•
Press and hold
for 3 seconds to manually adjust
the focus.
④
Capsule II is unable to connect to a Wi-Fi network.
• Refresh the list of available networks and retry.
• Reboot the wireless router or the device and retry.
⑤
How do I update firmware?
•
When a new version is detected you will be asked to
reboot and update.
To Next Page
Loading...
