User’s Manual U13731EJ3V0UM
23
CHAPTER 3 INSTALLATION
This chapter describes how to connect the cables to the IE-78K0-NS and the mode settings.
3.1 Connection
Connect the following ten products, which are sold separately.
Refer to Figure 1-1 System Configuration of IE-78K0-NS in CHAPTER 1 GENERAL for the system configuration
of the IE-78K0-NS.
• IE-70000-98-IF-C: Interface board (use cable that comes with IE-78K0-NS)
• IE-70000-PC-IF-C: Interface board (use cable that comes with IE-78K0-NS)
• IE-70000-PCI-IF-A: Interface board (use cable that comes with IE-78K0-NS)
• IE-70000-CD-IF-A: PC card interface (use NS card cable)
• IE-70000-MC-PS-B: AC adapter
• IE-780×××-NS-EM1: Emulation board
• IE-780×××-NS-EM4: Emulation board
• IE-78K0-NS-P0×: I/O board
• IE-78K0-NS-PA: Performance board
• NP-×××××: Emulation probe
Caution Connecting and removing cables or components from the target system and changing the
settings of switches, etc. should be carried out after turning off the power of the IE-78K0-NS
main unit and the target system.
To Next Page
Loading...
