CHAPTER 3 INSTALLATION
User’s Manual U13731EJ3V0UM
35
(2) When using the IE-78018-NS-EM1 when the target is at low voltage, supply the same supply voltage as that of
the target to the TP1 terminal pin on the IE-78018-NS-EM1. (This also applies when the voltage is 5 V.)
Figure 3-11. Position of TP1 on IE-78018-NS-EM1
CN1 CN2
TP1
Remark The maximum current consumption of TP1 is from 100 mA (1.8 V) to 300 mA (5 V).
Caution For details of the target voltage or maximum current consumption, refer to the relevant
emulation board user’s manual.
To Next Page
Loading...
