NEC 920 - Page 37

NEC TalkTime MAX™ 920 Manual
OPERATION SUMMARY Page
_________________________________________
NOTES:
o [X][X] = Memory Address 01 to 24.
[X] = Memory Address 1 to 9.
KEY OPERATION TERMS:
o Press = Press Key firmly.
o Press(Hold) = Press and hold down key.
o Turn = Change Mode
o Key-In = Enter a series of digits
_________________________________________
BASIC OPERATION:
Power On/Off:
o Press(Hold): [PWR]. For On or Off. 6
Place A Call:
o Key-in [Number]. Dial Number 6
Send A Number:
o Press [SND] 6
Receive A Call:
o Press Any Key Except [PWR] 7
End A Call:
o Press [END] 7
_________________________________________
CONVENIENCE FUNCTIONS:
Edit Display:
o Press [CLR]. Erase Digit. 9
Press [CLR Hold].Erase display 9
Backlight:
o Press [Any Key] Except [PWR]
For 10-second backlight. 15
View Hidden Digits:
o Press [FCN Hold].
With Number Displayed. 10
Earpiece Volume Control:
o Press [VOL] during standby. 7
View Own Number:
o Press [MEM]+ 0 + 0 11
_________________________________________
MEMORY STORING AND RECALL:
Store Number to Memory Address:
o Key-in Number. Press [FCN]+[MEM]+
[Memory Location]. 9
Store Number to Occupied Address:
o Key-in Number. Press [FCN]+[MEM]+
[Memory Location]. Press [MEM]
again to overwrite. 9