EasyManuals Logo

NEC AccuSync AS172 User Manual

NEC AccuSync AS172
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
English
English-11
Specifications
Monitor Specifications AccuSync AS172 Monitor
Notes
LCD Module Diagonal: 43.3 cm/17 inches Active matrix, thin film transistor (TFT)
liquid crystal display (LCD); 0.264 mm dot
pitch; 250 cd/m
2
white luminance, 1000:1
contrast ratio, typical.
Viewable Image Size: 43.3 cm/17 inches
Native Resolution (Pixel Count): 1280 x 1024
Input Signal 15pin Mini D-sub: Analog RGB 0.7 Vp-p/75 ohms
Sync
Separate sync. TTL level (Positive/Negative)
DVI-D Digital RGB
DVI(HDCP)
Display Colors 16,777,216 Depends on display card used.
Viewing Angle Left/Right: -85°/+85° (CR>10)
Up/Down: -80°/+80° (CR>10)
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Automatically
Vertical: 56 Hz to 76 Hz
Automatically
Resolutions Supported Landscape: 720 x 400*
1
: VGA text
640 x 480*
1
at 60 Hz to 75 Hz
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
Some systems may not support all modes
listed.
1280 x 960*
1
at 60 Hz to 75 Hz
1280 x 1024 at 60 Hz to 75 Hz.................
Recommended resolution is 60 Hz for
optimal display performance.
Active Display Area Horizontal: 337.9 mm
Vertical: 270.3 mm
Power Supply 100 - 240 V ~ 50/60 Hz
Current Rating 0.40 - 0.20 A
Power Maximun Operation: 14 W
Consumption Normal Operation: 11 W
Dimensions Landscape: 373.2 mm (W) x 373.1 mm (H) x 205.1 mm (D)
14.7 inches (W) x 14.7 inches (H) x 8.1 inches (D)
Weight 3.3 kg (7.3 lbs)
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
5°C to 35°C/41°F to 95°F
20% to 80%
0 to 2,000 m/0 to 6,562 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal
and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen
is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC AccuSync AS172 and is the answer not in the manual?

NEC AccuSync AS172 Specifications

General IconGeneral
BrandNEC
ModelAccuSync AS172
CategoryLcd monitor
LanguageEnglish

Related product manuals