NEC DT430 Series - Page 71

62
STEP 5: Select either “Standard (16dot)“ or “Small
(12dot)“.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press or the OK soft key.
• Press or key, and then press or the OK
soft key.
• TO SET A LANGUAGE
The following explains how to set a language to be
displayed on LCD.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
Note:
The enabled item is highlighted.
1
2
1
2
[Font Size]
OK
Back
Small (12dot)

Standard (16dot)
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting