➤ Hear confirmation tone and press Speaker.
➤ Inform Attendant your relocation is complete and request that the Attendant
turn Set Relocation Mode off.
S
tation Outgoing Lockout
C
HANGING L OCKOUT (PASSWORD) CODE
➤ Press Speaker.
➤ Dial Lockout (Password) Change access code ___.
➤ Dial current Lockout (Password) code.
➤ Dial new Lockout (Password) code.
➤ Press Speaker.
NOTE 1: By default, Lockout (Password) code is set at 0000000000 (10 zeros).
NOTE 2: When Lockout (Password) code is set for the first time, station is automatically restricted.
NOTE 3: Lockout (Password) code may be a maximum of 10 digits. If the new Lockout (Password) code is
less than 10 digits, press the Speaker to enter.
NOTE 4: When set, Station Outgoing Lockout restricts all outgoing calls.
S ET/CANCEL S TATION O UTGOING L OCKOUT
➤ Press Speaker.
➤ Dial Station Lockout.
➤ Set code ___
➤ Cancel code ___
➤ Dial Lockout (Password) code.
➤ Press Speaker.
A
ccount Code Entry
With an outside call in progress:
➤ Press Feature.
➤ Dial 66
.
➤ Dial Account Code
(16 digits maximum).
➤ Press Feature.
NOTE 1: The outside party will not hear digits being dialed.
NOTE 2: The Account Code Entry Code may be assigned to a Feature Access key or One Touch key.
13
With an outside call on hold:
➤ Dial Account Code Entry Code ____.
➤ Dial Account Code
(16 digits maximum).
➤ Retrieve held call.
NECK-007 Multiline Guide 4/4/01 3:55 PM Page 13
To Next Page
