NEC DTU-32D-2 - Page 9

7
C
onference Bridge
➤ Call a Conference Bridge extension.
➤ When the voice prompt is heard, enter the password and press
#.
➤ Start the conference call.
Start a conference call from an an off premise location:
➤ Call a line that is directed to the Conference Bridge.
➤ When the voice prompt is heard, enter the password and press
#.
➤ Start the conference call.
Start a conference call from an incoming CO call using an Automated Attendant:
➤ Call an outside line that is answered by an Automated Attendant.
➤ Dial the extension of the Conference Bridge.
➤ When the voice prompt is heard, enter the password and press
#.
➤ Start the conference call.
Start a conference call from an incoming CO call using an Attendant:
➤ Call the attendant, and ask to be transferred to a Conference Bridge extension.
➤ Wait until the transfer is complete.
➤ When the voice prompt is heard, enter the password and press
#.
➤ Start the conference call.
NOTE: Default passwords: Conference #1= 0001. Conference #2= 0002.
C
all Park - System
SET RETRIEVE
With a call in progress: From any station:
➤ Press Transfer. ➤ Lift handset.
➤ Dial Call Park Set code 4
*. ➤ Dial Call Park Retrieval code 4 #.
➤ Dial Call Park location 0~9
. ➤ Dial Call Park location 0~9.
➤ Replace handset. ➤ Converse.
NOTE: If the dialed Call Park location is busy, dial another Call Park location (0~9).
S
tation Busy/No Answer Options
A
UTOMATIC C ALLBACK
SET ANSWER
When calling a busy multiline telephone: When both telephones are idle
originating telephone rings:
➤ Dial Automatic Callback code 0
. ➤ Lift handset.
➤ Replace handset. ➤ Call is placed automatically.
NECK-007 Multiline Guide 4/4/01 3:55 PM Page 7