235
7. Advanced Sets other data for display.
-
1.Backlight Fade
Control
Sets whether Backlight Fade Control is in service, when
turning on/off the backlight of the display. (Disable/Enable)
Enable
4 Change Password Select this option to change the password to lock/unlock the
telephone.
0000
5 Security Not used.
*Security key must be programmed in advance. For the
programming of Security key, contact the system
administrator.
-
6 Peripherals
Select this option to use peripheral equipment of terminal.
-
1.USB Memory Not used.
-
2.BCA Option Select this option to configure the BCA. -
1.BCA Connection
Settings
Select this option to make the BCA connection settings.
-
1. Auto
Connection
Select this option to use Auto Connection.
(Disable/Enable)
Enable
2. Connection
Cycle
Select this option to set Bluetooth connection cycle.
(3 Seconds/10 Seconds/1 Minute/10 Minutes)
10 Seconds
2.Interrupt Ringing Select this option to specify whether to use Interrupt Ringing.
(Disable/Enable)
Enable
3.Smart Device
Type
Select this option to set the type of Smart Device.
(Type 1/Type 2)
Type 1
4.Auto Path Switch Select this option to specify whether to use Auto Path Switch
(Disable/Enable)
Enable
5.Illumination Select this option to Set the illumination pattern (color) for
informing call termination.
(Disable/Red/Green/Blue/Yellow/Purple/Light Blue/White/
Rotation)
Blue
Menu Item Description Default Value
To Next Page
Loading...
