NEC DTZ-6DE-3 - Page 58

49
• TO SET KEY TOUCH TONE
The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while the terminal is off-hook.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 3: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 4: Select Key Touch Tone.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting
2
2
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
OKBack

Security
Incoming Call
Talk

Usability
3
3
1
2
[Talk]
3
4
5
OKBack

Hold Music
Prefix
RTP Alarm
DTMF Tone

Key Touch Tone