NEC e313 - Making a Video; Camera Control during Video; Post-Video Operations

Multimedia centre -88-
To Make a Video 1 Press the SK1 (Camera) key from the Home screen or select Make video on Multimedia centre. Press the Enter key
to start recording. You can change the following settings:
2 Press the Enter key to stop recording.
After making a video, the capture completion screen appears. Select from the following operations available on the capture completion screen:
• Delete the file
Press the Options menu key and select Delete.
• Send the file as a message
Press the Options menu key and select Send as message.
To Do this Change camera direction Turn the camera to the angle you like. Change camera direction (while recording) Zoom in/out Press the Right key to zoom in or Left key to zoom out.
Adjust the exposure rate Press the Up and Down keys to adjust the exposure rate.
Use the Options menus Refer to Camera Options menu on page 86 for details. To Do this Send the file attached to a Multimedia message/Email
Press the SK1 (Send) key.
Note : Refer to Writing and Sending a New Message on page 53 for
details.
Return to the capture preview to make a new video
Press the SK2 (Back) key.
Use the Options menus
• Rename the file
Press the Options menu key and select Rename.
• Delete the file
Press the Options menu key and select Delete.
• Send the file as a message
Press the Options menu key and select Send as message.
To Do this