Settings -112-
Security
(Select “Security“or press 5 on "User settings" menu screen)
Security settings allows you to turn on/off the dial lock and automatic lock. You can also change code numbers: PIN1/
PIN2,the handset code and private PIN.
Locks
Set codes
Provides code number related settings.
Item Description
Dial Lock Turns on/off the dial lock function. This function cancels any key operation except
emergency calls, answering a call by the Start key, rejecting a call by the End key,
pressing and holding the End key to turn e313 on/off, earpiece volume control by
the Up or Down key while talking and turning off the alarm by any key. To turn the
dial lock function on or off, the handset code is required. Refer to New handset
code in the next item for details on the handset code.
Dial lock can also be turned on /off from the Home screen. Press the Options
menu key on the Home screen and select Dial lock.
Auto lock Turns on/off the automatic lock function. With Auto lock on, the handset will be
protected by Dial lock function automatically on Power on. After entering PIN1, the
handset will be in dial lock status.
Item Description
Activate PIN1 Selects Enable or Disable.
New PIN1/PIN2 Changes the PIN1/PIN2 number. Input the current PIN, the new PIN (4-8 digits) and
then the new PIN again for confirmation.
Unblock PIN1/PIN2 Displays PIN1/PIN2 entry screen when e313 is turned on.
Note : If you enter your PIN incorrectly three times in a row, the USIM card will be
locked. You can unlock it by using your Personal Unlock Key (PUK). Please
contact 3 for your PUK code.
New handset code Changes the handset code required to confirm important actions, such as deleting
all Contact list entries. This requires the Code Number to avoid accidental
operation.
To change the handset code, enter a new code (4 digits), then enter the new code
again for confirmation.
Note : When purchased, the Code Number is set to 0000.
New private PIN Changes the network password. Input the current password, the new password (4-8
digits) and then the new password again for confirmation.
Note : This password entry is needed to change the call restriction setting of e313.
To Next Page
Loading...
