Toolbox -126-
Useful Tips
• When the alarm goes off and vibration occurs, press the SK1 (Turn off) key to stop the alarm.
• When the alarm goes off and you have set snooze, do any of the following:
- To stop the alarm clock and cancel the snooze function, press the SK2 (Off) key.
- To snooze, press the SK1 (Snooze) key. After five minutes, the alarm clock operation will go off again.
- To not stop the alarm going off, press no keys. After three minutes, the snooze screen is displayed. To stop the alarm
at this point, press the SK2 (Cancel) key. If you do not press any more keys, the alarm clock will go off again after five
minutes.
The alarm clock goes off up to three times in all, unless you stop the snooze function or stop the alarm clock.
To Edit an Alarm
To edit your alarm clock setting, press the SK1 (Edit) key and edit. Proceed as described in To Set an Alarm on page 125.
To Change alarm clock status
You can change alarm clock status on/off/disable on the Alarm clock list screen. Select an alarm on the list and do the
following:
7 Fix the settings in the
alarm entry
Press the SK1(OK) key.
The alarm is set to on.
Note : Make sure that the set alarm is set to on. The
status can be changed by pressing SK2 (On/
Off/Disable). Refer to To Change alarm
clock status on page 126.
To Do this
1 Set alarm clock status To change the alarm clock status from On to Disable, press the SK2
(Disable).
To change the alarm clock status from On to Off, press the SK2 twice
(SK2 (Disable) -> SK2 (Off))
Disable cancels the next alarm but does not cancel recurring alarm.
Off indicates the set alarm clock is turned off but remains.
To Do this
To Next Page
Loading...
