-11- Setup
Power Saver
The power saver function turns the screen off when the handset is left without any operation for a certain period of time. By
pressing any key, you can turn the screen on.
Setting Clock
When using your e313 for the first time you will be prompted to set the current date and time.
To Set Clock
1 Press the MENU key, select the Settings icon, select Date and time, Set date and time and Home time.
2 Enter the current date and time. Refer to Date and time on page 114 for details.
Entering PIN Code
If you want to secure information in your phone, you can activate your PIN code so that the handset cannot be used without
entering the PIN on handset power on. (For how to activate PIN codes, refer to Security on page 112 in the Settings
section.)
PIN1 and PIN2 numbers are usually supplied with your USIM card. If not, or you have lost it, contact 3.
Proceed as described below.
To Enter PIN
1 Ensure that your USIM card is in your e313 and that the battery is charged.
2 Press and hold the End (On-Off) key until power is on.
3 If the Password screen is displayed, enter your PIN1.
If you make a mistake while entering your PIN, erase the wrong number by pressing the C key. The code you enter
appears as asterisks ( ).
4 Press the SK1 (OK) key.
When connecting to the network, the name 3 will appear. If you are connecting onto another network, the name of
another operator will appear.
Check your own number
To check your own number, press the Menu key and press 0 from the Home screen.
To Next Page
Loading...
