-53- Message
Writing and Sending a New Message
The following describes basic operations and useful tips when writing and sending a new message.
Basic Operations
The basic operations for writing and sending a message are shown below:
New Text Message
To Do this
1 Text screen for Text message Press the SK2 (Msg) or press the MENU key and select Messages.
Press the SK1 (New) key or press the Options menu key and select
New message.
On New message displayed, select Text message and press the Enter
key, and to the followings for each message type.
The New message screen is displayed.
2 Input the Message text Select the text box, input the message and press the Enter key.
3 Set the addressee Select the address box, input the addressee’s phone number and press
the Enter key (Maximum of 20 numbers not including the international
code +).
Note : To set the addressee from the Contact list, press the SK2 (Find)
key.
4 Send the message Press the SK1 (Send) key.
The message is sent and saved in the Sent folder.
To Next Page
Loading...
