SL2100 MLT User Guide Issue-1.0 Sept 2017
SL2100 Multiline Terminal Quick Reference Guide
(4W)
Thank you for purchasing NEC “SL2100” system.
Due to the flexibility built into the system, your Dialling Codes and Feature Capacities may differ from
those in this guide. Check with your Supplier / System Administrator and make a note of any differences.
Dial Keys
Press this key to place an
internal or external call on
Controls the built-in speaker which can be
used for Handsfree dialling/ monitoring.
LED on key lights when key is active.
History Key
* 12 Programmable Function Keys are available for IP7WW-12TXH-A1 TEL.
24 Programmable Function Keys are available for IP7WW-24TXH-A1 TEL.
** The illustration shows IP7WW-24TXH-A1 TEL.
This lamp flashes fast when a call is ringing and
flashes slower when a message has been left.
Alphanumeric Display
The LCD has 2 lines with 16 characters.
Exit Key
Exit any screen and return the display to “Time &
Date”.
Help Key
The user
can press this key followed by a
programmable key to check what Line or
Programmable Feature is assigned on the key.
Programmable Function Keys
Flexible Line keys or Feature Keys assigned by
the System Administrator.
Flash Key
Press key to finish an outside call and hear the
dial tone.
Transfer Key
Allows the extension user to transfer established
calls to another extension.
DND/CONF Key
(Do Not Disturb / Conference)
Setup a Do Not Disturb or Conference if pressed
during a call or in Idle state.
Mute (Microphone) Key
Mute handset or Handsfree Microphone. LED
lights when microphone is muted.
Clear/Back Key
Press this key to cancel the current action or
delete a character.
Cursor Key
Access various features with simple operation.
or
Volume (DOWN) Key
IP7WW-( )*TXH-A1 TEL
Press the Volume (UP) or (DOWN) keys during
a call.
To adjust speaker volume
Press Volume (UP) or (DOWN) keys during a
handsfree call.
To adjust ring tone volume
Press Volume (UP) or (DOWN) keys while the
phone is ringing.
To adjust LCD Contrast
To adjust the display:
1. Press the Enter key.
2. Dial 521 on the dial pad.
3. Press the Enter key.
4. Press the (UP) or (DOWN) Cursor keys to
adjust the display contrast.
5. Press Enter key.
6. Press Exit key to finish.
Making Internal Calls
1. Lift the handset or press the Speaker key to
receive dial tone.
2.
Dial the extension number of the required
party.
Making Outside Calls
1. Press the Line key to access the specific
outside line.
or
Lift the handset
or
Press the Speaker
access code.
2. Dial the telephone number of the required
party.
➥ Ask your System Administrator for the line
access code.
1. Press the Incoming Call History Key –
your last incoming call is displayed.
2. Press the (UP) or (Down)
scroll through your call list.
3. Press the Redial key to make the call.
Answering a Call
Your phone will ring and the Call Indicator
Lamp will flash.
1. Lift the handset.
or
Press the Speaker
handsfree.
Placing a Call on Hold
1. Press the Hold key during a call.
2.
Outside calls will flash at the Line key,
Internal calls will flash at the Hold key.
3.
Press the flashing key to retrieve the held
caller.
Redialling a Previous Number
1. Press the Redial key –
call is displayed.
2. Press the (UP) or (DOWN) Cursor keys to
scroll through your call list.
3. Press the Redial key to make the call.
Transferring a Call
1. Press the Transfer key during a call.
2.
Dial the extension number of the required
party.
3. Press the Transfer
through.
or
Wait for answer, announce the caller and
press Transfer to send the call through.
Handset
Speaker
NEC Enterprise Solutions reserves the right to change the specifications, functions, or features, at any time, without
notice.
NEC Enterprise Solutions has prepared this document for use by its employees and customers. The information contained
herein is the property of NEC Enterprise Solutions and shall not be reproduced without prior written approval from NEC
Enterprise Solutions.
Copyright 2017 NEC Corporation
To Next Page
Need help?
General
