NEC ITK-6D-1P - Page 36

TERMINAL SETUP
36
TO BACKUP PERSONAL SETTINGS
The user can backup personal settings of the terminal to the
FTP/TFTP/HTTPS server.
To back up the setting data, the terminal needs to be connected
to the network that has FTP/TFTP/HTTPS server.
■For details on the FTP/TFTP/HTTPS service, contact the
system administrator.
■For details on character entry method, see HOW TO
INPUT CHARACTERS.
Before starting the backup, the IP Address/URI of the
FTP/TFTP/HTTPS server must be entered from the terminal.
1. Set up the FTP/TFTP/HTTPS server.
<FTP server>
Confirm the designated directory for the backed up
file.
<TFTP server>
Specify a desired destination directory for the
backed up file.
<HTTPS server>
Confirm the designated directory for the backed up
file.
2. Press Menu key while terminal is in an idle state..
3. Select
□
3 Data Backup/Restore.
4. Select
□
4 Protocol.
5. Select a protocol used by the destination server,
then the display goes back to the Backup/Restore
screen.
When
□
1 FTP/
□
3 HTTPS is selected here, go to 6.
When
□
2 TFTP is selected here, go to 14.
6. Select
□
5 Account Settings.
7. Select
□
1 User ID.
8. Enter a User ID by using digit keys, then press the
Enter key or the OK soft key.
9. The display goes back to the Account Settings
screen. Select
□
2 Password.
10. Enter a password by using digit keys, then press
Enter key or the OK soft key.
11. The display goes back to the Account Settings
screen. Select
□
3 Folder.
12. Enter the destination directory of the FTP/
HTTPS server and then press Enter key or the OK
soft key.
13. The display goes back to the Account Settings
screen. Press the Left key or the Back soft key to
display the Backup/Restore screen.
14. Select
□
3 Server Address.
15. Enter the IP address/URI of the destination
FTP/TFTP/HTTPS server. For example, to set the
IP address of 10.41.208.205, enter 10*41*208*205
[separate with an asterisk (*)].
After entering the IP address, press the Enter key
or the OK soft key.
16. The display goes back to the Backup/Restore
screen. Select
□
1 Data Backup.
17. The default file name is displayed as follows:
■Do not change the extension of the backup file.
The setting data of the telephone can only be backed up
as a “.tgz” file.
■When changing the default file name, press the BK soft
key once to delete the default file name and then enter a
new file name by using the digits keys.
■A maximum of 20 characters (“0-9”, “A-Z”, “a-z”, “*”, “#”,
“.”, “-” or “_”) can be entered as a file name.
■To delete an entered character, press the BK soft key.
Press the Enc soft key to download the
encrypted backup file.
The encrypted backup file name is displayed
as “PersonalData.tgz.ef”.
If you make the unencrypted file, press the NoEnc soft key.
18. Press the Enter key or the Exec soft key to start
the data backup. While making a backup copy,
the LCD displays “Uploading...” first and then
“Saving...”.
Be sure not to turn OFF the terminal while “Saving...” is
displayed on the LCD.