Do you have a question about the NEC LT280 and is the answer not in the manual?
Display resolution | 1024 x 768 pixels |
---|---|
Vertical scan range | 48 - 120 Hz |
Horizontal scan range | 15 - 100 kHz |
Contrast ratio (typical) | 600:1 |
Projector native resolution | XGA (1024x768) |
Video in | Phono jack |
Audio input | 1 x 3.5 mm stereo |
RS-232 ports | 1 |
Dimensions (WxDxH) | 120 x 288 x 294 mm |
Power requirements | 100 - 240 V AC / 50 - 60 Hz |
Lamp power | 200 W |
Light source type | Lamp |
Service life of light source | 3000 h |
Noise level | 30 dB |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Weight | 3500 g |
---|