5. Functions <Pool (4)>
(2-3) Configuring Logical Disks
You can configure logical disks by allocating the required amount from the unused space in the
dynamic pool.
M110 M310
The maximum number of logical disk per pool 1024 1024
The maximum number of logical disk per unit 1024 4096
The minimum capacity of logical disk for configuration 1GB 1GB
The unit of logical disk for configuration 1GB 1GB
The maximum size of a logical disk which can be used as a
snapshot volume
10TB 10TB
The maximum size of a logical disk which can be used as a DDR
and MV
256TB 256TB
• The logical disks can be used immediately after they are configured. (Quick LUN configuration
function) Formatting of logical disks is run in the background.
57
NEC Confidential
To Next Page
Loading...
