English-9
English
7. Slide down the cable cover (Figure D.1).
8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.
NOTE: Please refer to the Caution section of this manual for proper selection of an AC power cord.
Figure D.1
9. Turn on the monitor with power switch on the top (Portrait) or left side (Landscape) of the monitor (Figure E.1). Turn on the
computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual (CD-ROM Version).
Figure E.1
Power switch
MD211G3 paper manual.indb 9MD211G3 paper manual.indb 9 3/27/12 11:18:32 AM3/27/12 11:18:32 AM
To Next Page
Loading...
