English-11
English
SETTING OSD LANGUAGE
• Set the OSD language before using OSD functions.
• Use the control keys (LEFT/RIGHT or UP/DOWN or EXIT) to access the “LANGUAGE SELECTION” menu.
• Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.
• To exit from this OSD menu, press the EXIT button.
NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changed
by the user.
For OSD menu or Advanced OSD menu, see CD-ROM Version.
MD211G3 paper manual.indb 11MD211G3 paper manual.indb 11 3/27/12 11:18:33 AM3/27/12 11:18:33 AM
To Next Page
Loading...
