English-16
5. Cable information
CAUTION: Use the provided specified cables with this
product so as not to interfere with radio and
television reception.
For USB, please use a shielded signal cable
with ferrite core.
For HDMI, DisplayPort and D-Sub 9-pin,
please use a shielded signal cable.
For Audio, please use a signal cable with
ferrite core.
Use of other cables and adapters may
cause interference with radio and television
reception.
6. Turn on the power for the external
equipment and the monitor
When connected to a computer, switch on the monitor power
first.
7. Operate the attached external equipment
Select the input source for the attached equipment to show
the image signal on screen.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the picture settings (See page 33)
If necessary, make adjustments to such as the backlight or
contrast in the OSD PICTURE menu.
10. Recommended Adjustments
To reduce the risk of the “Image Persistence”, please adjust
the following items based on the application being used:
“SCREEN SAVER”, “SIDE BORDER COLOR” (See page 41),
“DATE & TIME” (See page 36), “SCHEDULE SETTINGS”
(See page 36).
It is recommended that the “FAN CONTROL” setting
(See page 41) be checked ON also.
To Next Page
Loading...
Need help?
General