English−19
English
5. Please check that you can still raise and lower the monitor screen after you have installed the cables ( and ).
DisplayPort Cable
DisplayPort Cable
USB Cable
USB Cable
Power Cord
Power Cord
6. Connect the power cord to a power outlet.
Please refer to the Caution section of this manual for proper selection of the AC power cord (see page 9).
Please make sure that enough power is supplied to the monitor. Please refer to “Power Supply” in the
“Chapter 4 Specications” on page 29.
7. Turn on the monitor by pressing the
button and then turn on the computer.
If you have any problems please refer to the Troubleshooting section of this User’s Manual (see page 25).
Adjustable Stand with Pivot Capability
Hold the monitor on each side and adjust height, tilt and swivel as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Please refer to “CAUTION 5”.
To Next Page
Loading...
Need help?
General