English
English-7
Figure C.2
5. To keep the cables neatly organized, place them into the cable management system that is built into the stand.
Place the Power cord into the specific hooks, as indicated in Figure C.2/Figure C.3.
Place the D-Sub and the DVI cables into the specific hooks, as indicated in Figure C.2/Figure C.3.
6. Make sure all cables are resting flat against the stand (Figure C.2).
Please check Tilt, Rise and Lower monitor screen and screen rotation when you manage cables.
Power Cord
DVI Cable
Audio Input
D-SUB Cable
Flat
D-Sub Cable
Figure C.3
7. Hold the all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover
off as shown in Figure D.2.
Insert Top First
Figure D.1 Figure D.2
Power Cord
Flat
DVI Cable
To Next Page
Loading...
