English−44
INFORMATION
INFORMATION Menu
INFORMATION Provides information about the current input signal, the model, serial numbers and USB-C port’s status of
your monitor.
OSD Warning
OSD warning messages close by touching the MENU key.
NO SIGNAL: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there is
a change of input signal, the “NO SIGNAL” window will appear.
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn’t have proper timing, the “OUT OF RANGE” message will
appear.
USB functionality: This message gives a request to set [USB FUNCTIONALITY] setting. See page 41.
Remove USB-C cable: This function gives a warning when abnormal voltage is detected on USB-C port. Please refer to “USB
Type-C device does not work” in troubleshooting. See page 32.
To Next Page
Loading...
Need help?
General