NEC MultiSync PA322UHD User Manual

English-34
8. Press SELECT to start the confi rmation of white point.
9. After the confi rmation is fi nished, FINE TUNING MODE message appears.
10. At the FINE TUNING MODE message (Figure C.6), press SELECT if the copy result is satisfactory. If the copy result is
unsatisfactory, manually fi ne tune the white point using the “LEFT” and “RIGHT” buttons, and press SELECT.
11. To end the calibration mode, press “EXIT”.
Figure C.6

NEC MultiSync PA322UHD Specifications

General

Brand	NEC
Model	MultiSync PA322UHD
Category	Monitor
Language	English