E-7
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE MULTISYNC V SERIES COLOR MONITOR:
DO NOT OPEN THE MONITOR. There are no user serviceable
parts inside and opening or removing covers may expose you to
dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.
Use the monitor in a clean, dry area.
Do not spill any liquids into the cabinet or use your monitor near
water.
Do not insert objects of any kind into the cabinet slots, as the
may touch dangerous voltage points, which can be harmful or
fatal or may cause electric shock, fire or equipment failure.
Do not place any heavy objects on the power cord. Damage to
the cord may cause shock or fire.
Do not place this product on a sloping or unstable cart, stand or
table, as the monitor may fall, causing serious damage to the
monitor.
Keep the monitor away from high capacity transformers, electric
monitors and other devices such as external speakers or fans,
which may create strong magnetic fields.
If possible, position the monitor so that it is facing the east to
minimize the effects of the earths magnetic field.
Changing the direction of the monitor while it is powered on
may cause image discoloration. To correct this, turn the monitor
off for 20 minutes before powering it back on.
To separate the equipment from the power source you have to
remove the plug from the inlet socket.
When operating the MultiSync V Series with it is AC 220-240V
worldwide power supply, use a power supply cord that matches
the power supply voltage of the AC power outlet being used.
The power supply cord you use must have been approved by
and comply with the safety standards of your country. (Type
H05VV-F should be used except in UK)
In UK, use a BS-approved power cord with molded plug having
a black (5A) fuse installed for use with this monitor. If a power
cord is not supplied with this monitor, please contact you
supplier.
Recommended use
E
To Next Page
Loading...
