NEC MultiSync V520

E-11
Monitor
Specifications
MultiSync V720
Monitor
Notes
Picture Tube Diagonal :
Viewable Image Size:
Radius:
43cm(17inch)
40.6cm(16.0inch)
1210mm
90° deflection,0.28mm trio dot pitch,medium
short persistence phosphor, multi-layered, anti-
static screen coating, semi-tint screen, Invar
Shadow Mask and OptiClear scree surface.
Input Signal Video:
Sync:
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal:
Range Vertical:
31kHz to 70kHz
55Hz to 120Hz
Automatically
Automatically
Resolutions Supported
Resolution based on horizontal
and vertical frequencies only
640 x 480 @60 to 120Hz
800 x 600 @55 to 110Hz
832 x 624 @55 to 106Hz
1024 x768 @55 to 87Hz
1152 x 870 @55 to 77Hz
1280 x 1024 @55 to 66Hz
Some systems may not support all modes
listed
NEC cites recommended resolution at 85 Hz
for optimal display performance.
Active Display Area Horizont:
(Factory setting) Vertical:
310mm
232mm
Dependent upon signal timing used,
and does not include border area.
Active Display Area
(Full scan)
325mm
244mm
Dependent upon signal timing used,
and does not include border area.
Power Supply AC 100 -240V, 50 / 60Hz
Current Rating 1.8 A@100 - 240V
Dimensions 403(W)x420(H)x418(D)mm
Weight 15.5kg
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
0
¢J¢J
¢J¢J
¢J
to +35
¢J¢J
¢J¢J
¢J
30% to 80%
0 to 3000m
-20
¢J¢J
¢J¢J
¢J to +60
¢J¢J
¢J¢J
¢J
10% to 90%
0 to 13700m
NOTE: Technical specifications are subject to change without notice.
E
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync.(Positive/Negative)(TTL Level)