NEC MultiSync X461UNV Manual

(39/43)
Item OP
code
page
OP code Parameter Remarks
Information OSD 02h 3Dh 0:Disable
information OSD
3-10:
OSD timer [seconds]
OSD Transparency 02h B8h 0: None
1: Off(Opaque)
2: TYPE1
3: TYPE2
Menu tree reset
(OSD)
02h CBh 0: None
7: Reset
OSD category
Momentary
Monitor ID 02h 3Eh 1-100:ID
IR Control 02h 3Fh 1: Normal
2: Primary
3: Secondary
4: Lock (Off)
H monitor 02h D0h 1
|
10
Number
of H-division
V monitor 02h D1h 1
|
10
Number
of V-division
Position 02h D2h 1: Upper left
|
MAX.: Lower right
Tile comp 02h D5h 1: Disable (Off)
2: Enable (On)
Tile
Matrix
Mode 02h D3h 1: Disable (Off)
and display frame
2: Enable (On)
3: Disable (Off)
and erase frame
(Set only)
Power On Delay 02h D8h 0: Off (0sec)
│
50:50sec
Power Indicator 02h BEh 0: None
1: Off
2: On
External control 10h 3Eh 0: No mean
1: RS-232C
2: LAN
Setting copy N/A
MULTI DISPLAY
Menu tree reset
(Multi Display)
02h CBh 0: None
8: Reset
Multi Display
category
Momentary
Power Save 00h E1h 0: Off
1: On
Standby Mode 02h 9Ah 0: None
1: Standby
2: ECO Standby
Fan Control 02h 7Dh 0: None
1: Auto(No offset)
2: Forced ON
3: Auto(offset -2)
4: Auto(offset -4)
5: Auto(offset -6)
6: Auto(offset -8)
7: Auto(offset -10)
Offset
affects to a
selected
sensor.
DISPLAY PROTECTION
Screen Saver
Gamma 02h DBh 1: normal
2:screen saving
gamma

NEC MultiSync X461UNV Specifications

General

Brand	NEC
Model	MultiSync X461UNV
Category	Monitor
Language	English