English-53
English
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top
priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly
products, and always strive to help defi ne and comply with the latest independent standards from agencies such as ISO
(International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefi t by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specifi c information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe),
http://www.nec-display.com (in Japan) or
http://www.necdisplay.com (in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
Mode Power consumption LED color
Normal Operation*
1,
*
2
Approx. 150 W Green
Energy Saving Mode (AUTO POWER SAVE) Less than 0.5 W Amber
Energy Saving Mode*
1
(AUTO STANDBY) Less than 0.5 W Red
Power Off Less than 0.5 W Red
*1: without any option, with factory settings.
*2: depends on destination.
For additional information visit:
http://www.necdisplay.com/ (in USA)
http://www.nec-display-solutions.com/ (in Europe)
http://www.nec-display.com/global/index.html (Global)
For Energy Saving information: [Default setting: AUTO STANDBY]
For ErP requirement:
Setting: DISPLAY PROTECTION
POWER SAVE AUTO STANDBY
EXTERNAL CONTROL LAN POWER OFF
ADVANCED OPTION 1 INPUT DETECT NONE
Power consumption: 0.5 W or less.
Time for power management function: Approx. 5-600 sec.
For ErP (Network standby) requirement:
Setting: DISPLAY PROTECTION
POWER SAVE AUTO POWER SAVE
EXTERNAL CONTROL LAN POWER OFF
ADVANCED OPTION 1 INPUT DETECT NONE
Power consumption: 0.5 W or less (with 1 port activating)/2.0 W or less (with all ports activating)
Time for power management function: Approx. 5-600 sec. (Depend on setting)
Manufacturer’s Recycling and Energy Information
To Next Page
Loading...
Need help?
General