NEC MultiSync XG110LC

109
m Selecting “GOTO”
1) Use the CURSOR or button to select “GOTO” and press
ENTER.
• The “GOTO” input screen will be displayed.
2) Enter the scan number line to which you want to jump to
using the INPUT button and press ENTER.
• If you have made an error, press END to return to the
Program menu, then start again.
• The “SEQUENCER” screen will be restored to its last
setting.
m Selecting “LOOP”
1) Use the CURSOR or button to select “LOOP” and press
ENTER.
• The “LOOP/COUNT” input screen will be displayed.
2) Enter the number of the destination line (LOOP) and the
number of the loop times (COUNT) in this order using the
INPUT button and press ENTER.
• If you have made an error, press END to return to the
Program menu, then start again.
• The “SEQUENCER” screen will be restored to its last
setting.
INPUT
WAIT
GOTO
LOOP
P-ON
P-OFF
INSERT
DELETE
GOTO __
INPUT
WAIT
GOTO
LOOP
P-ON
P-OFF
INSERT
DELETE
LOOP __ COUNT __
SETTING