28
SIGNAL ENTRY
5 To complete the signal entry, press the END button.
• Whenever the END button is pressed, the menus will
sequence in this order:
“ADJUST” menu → Source screen.
• When your passcode is in effect, the “RETURN USER
MODE?” screen will be displayed. If this happens, use
the CURSOR or button to select either “YES” or
“NO” and press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode
the next time, you will need to re-enter your
passcode.
• NO ........... When you try to enter the ADJUST mode
the next time, you will not need to re-enter
your passcode.
RETURN USER MODE?
YES NO
To Next Page
Loading...
