61
5 Enter the new passcode again.
1) Each time you press the INPUT button, an asterisk will
appear under the “CONFIRM NEW PASSCODE?” message.
2) Once you have finished entering the new four digit passcode,
press ENTER.
NOTE: If you have made an error, press the NORMAL button to
delete the asterisk “∗”. Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button then
press the NORMAL button.
3) If the entered passcode is correct, the “CHANGE
PASSCODE COMPLETE!!” message will be displayed.
NOTE: If the passcode is not correct, the “WARNING DIFFER-
ENT PASSCODE!!” message will be displayed. You are required
to enter the new passcode correctly.
6 To complete, press the END button.
• When the END button is pressed once, the “RETURN USER
MODE?” menu will be displayed. Use the CURSOR or
button to select either “YES” or “NO” and then press ENTER.
This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode again,
you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode again,
you will not need to re-enter your passcode.
RETURN USER MODE?
YES NO
––––
CONFIRM NEW PASSCODE?
PASSCODE
To Next Page
Loading...
Need help?
General